ck31 service manual

File Name:ck31 service manual.pdf
Size:2750 KB
Type:PDF, ePub, eBook, fb2, mobi, txt, doc, rtf, djvu
Category:Book
Uploaded21 May 2019, 16:21 PM
InterfaceEnglish
Rating4.6/5 from 829 votes
StatusAVAILABLE
Last checked8 Minutes ago!

ck31 service manual

Call Diana at 1-847-750-9231. Try restoring computer to factory defaults from the intermec settings. After the terminal has fully booted (can take an hour when slow) and if you manage to access the CPU monitor you would be able to see that the CPU is running constantly at 100% - not good. A complete blank and operating system restore is required. If you need any more help then please do not hesitate to contact us:- or TEL 01202 620955 Login to post You can also set your wireless IP. Once this is done there will be an icon in the taskbar that shows connection and signal strength. Depending on the firmware revision of the terminal you should be able to use the tools to ping a device on your network, if the server responds to a ping then you should be able to get to your server when you try and connect.Hopefully one of other experts will be able to Thank you for using FixYa.How I can put the settings to access WPA2 in wireless network? Note: Using the Restore Defaults option restores all parameters including network settings. When you choose to restore defaults, you erase the registry. As a result, you may lose network communications. A Run Application dialog box appears asking if you want to run the restore defaults program. www.portablesolutions.comAfter the terminal has fully booted (can take an hour when slow) and if you manage to access the CPU monitor you would be able to see that the CPU is running constantly at 100% - not good. If you need any more help then please do not hesitate to contact us:- or TEL 01202 620955 It will take you to the manual and you can print it out. Good Luck. Try restoring computer to factory defaults from the intermec settings.Call Diana at 1-847-750-9231.Call Diana at 1-847-750-9231.Answer questions, earn points and help others. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation.

2005-2006 by Intermec Technologies Corporation. All rights reserved. CK31 Handheld Computer User’s Manual. CK31 Handheld Computer User’s Manual. The CK31 Handheld Computer User’s Manual provides you with information about the features of the CK31 and how to install, operate, maintain, and troubleshoot the CK31. Before you install and configure the CK31, you should be familiar with your network and general networking terms, such as IP address. It is provided “as is” without express or implied warranty. CK31 Handheld Computer User’s Manual. For a complete list of accessories, see “Accessories for the CK31” on page 122. CK31 Handheld Computer User’s Manual. You can charge the battery before or after you install it into the CK31.You can use Intermec Settings to easily make all of these configuration changes. For help, see “Configuring the CK31 With Intermec Settings” on page 36. If you do not see a battery icon, your battery has a good charge. When you order the CK31 with a TE 2000 application, you must order the corresponding keypad overlay.Once you understand how to use the color- coded keys and key sequences, you will know how to access all of the additional features printed on the keypad overlay. Capitalizing All Characters To type all alphabetic characters as uppercase letters, you can enable the Caps Lock feature on the CK31 keypad. In Suspend mode, the CK31 continues to supply power to all memory, but turns off power to most hardware. The Keypad menu expands to show you the options. Using the Touch Screen The CK31 has a color touch screen display. The screen is 240 x 320 pixels. The desktop is 240 x 300 pixels and the taskbar is 240 x 20 pixels. In addition, the screen supports Unicode characters, user-programmable fonts, and bitmap graphics. The first time you turn on the CK31, the taskbar displays the Start menu icon, the time, the keyboard icon, and the desktop icon. You need to replace the battery now. The window positioning feature is turned on.

The CK31 is connected using ActiveSync. Backup battery is low. Replace the battery or place the CK31 in a charger. Allow 15 minutes for the backup battery to recharge. Ctl key is enabled. Shift key is locked. Shift key is enabled. No UDP Plus connection. For help, see “Configuring the Network Parameters for a UDP Plus Network” on page 43. Ready-to-Work indicator (blue) Plus, if you are using an integrated handle or a scanner attached to the serial port, the way you scan bar codes is different. Scanning With the 1D Linear Imager If the CK31 has a 1D linear imager, use the following procedure to practice how to scan a bar code. The linear imager can decode PDF417 bar codes as well as bar codes with high-density, low- density, and poor quality in any lighting conditions. To scan a PDF417 or Micro PDF417 bar code with the 1D linear imager 1 Press I to turn on the CK31. You may need to continue moving the beam from the bottom of the bar code label to the top, and back to the bottom, until you hear the high beep. You can check the Intermec web site for a more recent version of this online manual. CK31 Handheld Computer User’s Manual. There are two serial adapters available to support decoded and undecoded scanners. When you use Energy Saver mode, the scanner is active while you are pressing the trigger and goes into Standby mode after a good read. With Energy Saver mode enabled, the current consumption drops to zero during standby. ScanDemo enables the CK31 to read bar code labels and display the information encoded on the label along with the symbology used to encode it. CK31 Handheld Computer User’s Manual. The card should eject far enough to easily remove it from the CK31. 4 Remove the SD card from the CK31. 5 Replace the door and attach it with the two captive screws. Configuring the CK31: The CK31 provides several ways for you to configure the communications, device, and imaging parameters. CK31 Handheld Computer User’s Manual.

Opening Intermec Settings You can open Intermec Settings while running any application. To open Intermec Settings 1 Tap the Start icon or press C and then B. The Start menu appears. Intermec Settings Menus: Use this diagram to help navigate through the Intermec Settings application. This diagram should only be used as a guide; it does not accurately represent all of the information you will see on your screen. For a complete list of the default settings, see “Default Configuration” on page 130. Note: When you use the Restore Defaults command, it restores all parameters including network settings and it erases the registry. The CK31 erases the registry and then performs a cold boot. When the CK31 is done booting, the calibration screen appears. 5 Follow the instructions on the screen to calibrate your stylus. The CK31 ships with a SmartSystems client, which means it is SmartSystems-enabled. The console displays all of the CK31s in your network. In the console, you can right-click a CK31 and a menu appears. For help, see “Configuring Security” on page 49. The easiest way to configure the network parameters on the CK31 is to use Intermec Settings. For help, see “Configuring Security”. CK31 Handheld Computer User’s Manual. For a technical description of the serial port, see “Pin Assignments for the Serial Port”. Insert the CK31 into the dock. 3 Turn on the CK31. 4 Make sure that your CK31 is talking to the network and that the network can see your CK31. CK31 Handheld Computer User’s Manual. Different profiles let your CK31 communicate in different networks without having to change all of your security settings. For example, you may want to set up one profile for the manufacturing floor and one for the warehouse. Using WPA Security Wi-Fi Protected Access (WPA) is a strongly enhanced, interoperable Wi-Fi security that addresses many of the vulnerabilities of Wired Equivalent Privacy (WEP).

The CK31 also supports Wi-Fi Protected Access 2 (WPA2) if you are using Funk security. If you choose TLS: a Load a user and root certificate on your CK31. For help, see “Loading a Certificate” on page 62.The value must match the key value on the access point. The passphrase must be from 8 to 63 characters. After you enter a passphrase, the CK31 internally converts it to a pre-shared key. The User Logon dialog box appears. The value must match the key value on the authenticator. After you enter a passphrase, the CK31 internally converts it to a pre-shared key. Configuring 802.1x Security With Funk Security 1 Make sure you have configured the communications and radio parameters on your CK31. If you choose TLS: a Load a user and root certificate on your CK31. For help, see “Loading a Certificate” on page 62.Settings box, choose the Select button.The User Logon dialog box appears.LEAP security is not supported with Microsoft security. To enable LEAP security on your CK31 1 Make sure you have selected Funk as your security choice.: 2 Make sure you have configured the communications and radio parameters on your CK31. After cold booting the CK31, you may need to correct the date and time. To load certificates if you are using Active Directory. The certificates application appears. The resource kits. You may need to rewrite parts of your application when converting it for use on the CK31. See the resource kit for a list of functions that are not supported.This folder is the recommended location for placing your application install files. Use the following procedures to learn how to copy files and install applications on the CK31 using ActiveSync. The file has now been copied to the CK31 and you can see it using My Computer on the CK31. 6 Navigate to your application file and run it. To install applications using the SD card 1 If you are using an SD card reader, remove the SD card from the CK31 and place it in the reader.

The CK31 ships with the Avalanche Enabler already loaded on it. Each time the Avalanche Enabler is activated (typically on a warm boot), the CK31 attempts to connect to the Avalanche Agent. Anyone can turn on the CK31 and access all of the information and tools loaded on it. When you. You are returned to the Control Panel. 8 Close the Control Panel. CK31 Handheld Computer User’s Manual. When you make a backup copy of the file system, the CK31 saves the file system to a folder called Persistent Copy. Intermec recommends using an SD card reader. Note: If you are using an SD card reader to copy files to your SD card, see “Installing the SD Card”. For help, see “Cold Booting the CK31” on page 112. Upgrading Your CK31 Using SmartSystems Console You can use the SmartSystems Console to upgrade the operating system on your CK31. SmartSystems Console will tell you that it is installing the upgrade on your CK31. Diagnostic Test Page Diagnostic Test Page 802.11 Information LED Test Authentication Network Information Information Battery Information Network Test Boot Code Version Operating System Version Configuration Table Ping Utility CPU Monitor. For example, you can run an LED test to determine if your CK31 lights are working correctly. Use the Software diagnostics menu to view the version of your operating system, the bootcode version, and Intermec Value Add (IVA) information. You can also use this screen to see the current volts and charging status. For example, if you remove the main battery every night to charge it outside the CK31, the backup battery will be low in the morning. This usage pattern does not harm the backup battery. The dialog box continues to appear until the backup battery is fully charged. You must install a fully charged main battery or place the CK31 in a charger. It takes about 15 minutes for the backup battery to charge up to 2.4V.

You can use this table to give the Intermec representative information on the hardware and software that were installed at the Intermec factory. The CPU Monitor icon ( ) appears on the taskbar. For example, you may want to test the screen if you do not see complete characters on the screen. You can press the number associated with a font to see an example of how the font appears on the screen. For example, press 1 to see how Lucida Console looks on the screen. Sample Screen. The LED Test turns the lights on the CK31 on in this sequence: Good Read light, the user-defined lights, Ready-to-Work indicator, and then the System Status light. The lights blink one time each and then they blink five times each. Sample Screen Operating System Version Use the OS Version diagnostic screen to view the operating system software version loaded on the CK31. Sample Screen CK31 Handheld Computer User’s Manual. You can also see the Flash Part ID.The RAM Monitor icon ( ) appears on the taskbar. When you select the test, the CK31 sounds a series of beeps from the default beep through the entire range of quiet to loud beeps. You will also find information on booting the computer and routine maintenance. If you have any problems using the CK31, look in this chapter to find a possible solution. This chapter consists of the following sections:. If you cannot find the answer to your problem in the “Problems and Solutions” section, you may need to call Product Support. If you send the CK31 in for service, it is your responsibility to save the computer data and configuration. Intermec is responsible only for ensuring that the keypad and other hardware features match the original configuration when repairing or replacing your computer. You are setting up multiple access The CK31 does not save WEP key values when you points in a network, with different change the SSID. Re-enter the WEP key value after you SSIDs, and the connection fails.

You need to re-enter the date your system date is incorrect”. You may also be using the CK31 out of bar.The CK31 is not range of an access point. Try moving closer to an communicating with the access access point to re-establish communications. This is light does not turn off. Follow these steps: cable. The CK31 tells you it is performing a warm boot and the screen comes back up to the start screen. You may damage the reset switch. Replace the battery. The battery light on the CK31 blinks three times and the CK31 starts the power on sequence. Note: The correct date and time settings are not always saved through a cold boot. Opening the unit will void the warranty and may cause damage to the internal components. To clean the scanner window and computer screen Press I to turn off the CK31. Physical Dimensions Length: 23.4 cm (9.22 in) Width: 9 cm (3.54 in) Thickness: 5.3 cm (2.07 in) Weight: 594 g (20.8 oz) CK31 Handheld Computer User’s Manual. The holster and belt support either right or left-handed use and you can use it to carry a CK31 with or without a handle. Pin 13 Pin 1 Pin 26 Pin 14 Identifying the Pins in the CK31 Serial Port. If you restore the CK31 to factory default settings, it will use these values. The tables are organized according to the options in Intermec Settings. Navigating Through the Reprogrammable Keypad Utility. CK31 Handheld Computer User’s Manual. You do not need to select a modifier or function key. 5 Press Enter. The Key Response dialog box appears. 6 Select Unicode Character and press Enter. The Unicode dialog box appears. CK31 Handheld Computer User’s Manual. The hexadecimal scan code for the key appears in both fields. 3 Press Enter. The select modifiers dialog box appears. CK31 Handheld Computer User’s Manual. The Virtual Key (VKEY) dialog box appears. 7 Select the Entry Mode for the VKEY character. CK31 Handheld Computer User’s Manual. You do not need to select a modifier or function key. 5 Press Enter.

The Key Response dialog box appears. CK31 Handheld Computer User’s Manual. You do not need to select a modifier or function key. 5 Press Enter. The Key Response dialog box appears. 6 Select Run Program and press Enter. The application dialog box appears. CK31 Handheld Computer User’s Manual. The hexadecimal scan code for the key appears in both fields. 3 Press Enter. The select modifiers dialog box appears. 4 Press Enter. The Key Response dialog box appears. CK31 Handheld Computer User’s Manual. CK31 Handheld Computer User’s Manual. To remove one reprogramming modification 1 Press Ctl Alt Shift D. The Remove all keypad modifications dialog box appears. 2 Tap No. The next dialog box appears. CK31 Handheld Computer User’s Manual. Finding the Registry Entries for Keypad Changes The CK31 provides registry files for each keypad change you make. To combine entries, copy all the keys into a single registry file and combine identical keys to contain the data from both files. To enable the keypad macro utility 1 Double-tap My Computer. 2 Double-tap the Windows folder. 3 From the Windows folder, double-tap FilterKeysToggle.exe. The Key Reprogram Feature dialog box appears. CK31 Handheld Computer User’s Manual. If you select Manual, you need to enter the time for the delay. 7 Press Enter. The macro entry dialog box appears. CK31 Handheld Computer User’s Manual. To remove all macros 1 Press Ctl Alt Shift C. The Remove all keypad macros dialog box appears. CK31 Handheld Computer User’s Manual. The select modifiers dialog box appears. 4 Select the modifiers that you have assigned to the macro key and press Enter. You will hear a beep when your changes are successful. CK31 Handheld Computer User’s Manual. Please turn it on so that you can experience the full capabilities of this site. Please turn it on so that you can experience the full capabilities of this site. The CK31 capsule is integrated in a rugged metal housing and fits any mounting module of the DAM Series.

To prevent contact problems, the capsule is equipped with large-area, self-cleaning, gold-plated contacts with deep threads to prevent misalignment and ensure extra-long life. The package includes a special two-part windscreen, which efficiently reduces wind and pop noise. In order to add spare parts we have to empty your current cart. In order to add new products we have to empty your current cart. Used: Very GoodPlease try again.Please try again.Please choose a different delivery location.Please try your search again later.The CK31 also offers a new area imager for the greatest scanning flexibility by supporting all significant 1D and 2D symbologies. The CK31 state-of-the-art screen can be read in a variety of indoor and outdoor conditions. Its full 'quarter VGA' resolution features a touch screen, so the CK31 is able to run both traditional, text-based applications or todays more graphic interface solutions. Accessories such as cables, batteries, power supplies, manuals and software disks are sold separately unless stated otherwise above. If you are uncertain about what is included with your purchase, or have any technical or other questions, please contact us before placing your order. We are eager to assist you in making the correct choice. Please note that this product is no longer being manufactured and it's one year warranty is provided by Cybarcode, Inc.To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzes reviews to verify trustworthiness. Please note that this product is out of production and is no longer being manufactured or serviced by Intermec. Accordingly, warranty services are provided exclusivley by Cybarcode, Inc.To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average.

The cardioid polar pattern minimizes noise and ambiance at the off-axis (sides) of the microphone. The result increases directivity and provides high gain-before-feedback response when using near speakers or monitors. It is also quite common that customers throw outUser manuals are alsoTry Google Search! Is there a way to lubricate or dismantle it to fix that. What about a service manual?. Manual Request - Vanguard Espod CX 203AP Aluminum Tripod ESPOD CX 203AP Posted by: John Laurence 2020-09-07 06:41:02 Hi I am requesting a manual guide for my Vanguard Espod 203ap. Learn more - opens in a new window or tab This amount is subject to change until you make payment. For additional information, see the Global Shipping Programme terms and conditions - opens in a new window or tab This amount is subject to change until you make payment. If you reside in an EU member state besides UK, import VAT on this purchase is not recoverable. For additional information, see the Global Shipping Programme terms and conditions - opens in a new window or tab Delivery times may vary, especially during peak periods and will depend on when your payment clears - opens in a new window or tab. Learn More - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or shop return that has been used. See the seller’s listing for full details and description of any imperfections. You're covered by the eBay Money Back Guarantee if you receive an item that is not as described in the listing. Find out more about your rights as a buyer - opens in a new window or tab and exceptions - opens in a new window or tab. Contact the seller - opens in a new window or tab and request a postage method to your location. Please enter a valid postcode.

Please enter a number less than or equal to 0. Expected dispatch time may vary and is based on seller's order cut-off time. We may receive commission if your application for credit is successful. Terms and conditions apply. Subject to credit approval. NB.There is more chance of next day delivery if you select. Standard Delivery (Royal Mail 1st Class). Overseas orders (not UK).If you require a TRACKING NUMBER select the ROYAL MAIL INTERNATIONAL TRACKED option Would highly recommend. We may receive commission if your application for credit is successful. All Rights Reserved. User Agreement, Privacy, Cookies and AdChoice Norton Secured - powered by Verisign. As a result, the web page can not be displayed. Cloudflare monitors for these errors and automatically investigates the cause. To help support the investigation, you can pull the corresponding error log from your web server and submit it our support team. Please include the Ray ID (which is at the bottom of this error page). Additional troubleshooting resources. You must have JavaScript enabled in your browser to utilize the functionality of this website. Please, check your email for the confirmation link. Consumer Materials Consumer Mat. Manuals Manual Conversion Kits Conversion Kits Please note, you must be logged in to the Partner Site to view price sheets. Please note, you must be logged in to the partner site to view bulletins. Currently in stock at the supplier Add to cart Compare Add to watch list Item 9175690 Share Description The CK31 is a high-performance condenser microphone capsule with a wide cardioid polar pattern, especially designed for inexperienced speakers and applications where more than one person uses the microphone. Information subject to change. Questions about this product Your question about this product The Community terms and conditions apply digitec Deal of the day To Current offers Help and contact Help and contact You have questions.

Visit our Help Centre Go to Help Centre Service Service Redeeming vouchers Delivery and collection Payment methods Minimum order surcharge Returns and warranty Warranty extensions About us About us Digitec Galaxus AG B2B Management Become a partner Press Return policy General terms and conditions Disclaimer Privacy statement Locations Locations Basel Bern Dietikon Geneva Kriens Langendorf Lausanne St Gallen Winterthur Wohlen Zurich Social Media Social Media Facebook Twitter YouTube LinkedIn Instagram Change language: English Deutsch Francais Italiano VAT: Instead of prices Individual price of products in set. You must have JavaScript enabled in your browser to utilize the functionality of this website. We're giving 1st priority to schools, education, government, and businesses affected by COVID-19. To prevent contact problems, the capsule is equipped with large-area, self-cleaning, gold-plated contacts with deep threads to prevent misalignment and ensure extra-long life. The package includes a special two-part windscreen, which efficiently reduces wind and pop noise. Even if chocolate chip is on your mind, our cookies make an important contribution to a great shopping experience. They help us to show you relevant offers, remember your settings to ease navigation on our website and alert us when the website is slow or unstable. You can view and manage further details and options here.Always with customised added value for musicians. Close Service Contact us Help Standard Delivery Times ?60 Add to Basket 13% bought AKG GN 30 E ?205 7% bought AKG CK33 ?105 6% bought AKG GN 155 ?349 2% bought AKG GN 30 ?191 Our most popular Modular Microphone Systems Of these, 8 customers have written no texts or given their feedback in another language. 4 1 Customer One customer has given this product a 4-star rating. No customer has written a text about this; or they have written a text in a different language. 3 2 Customers 2 customers have given this product a 3-star rating.

Standard Delivery Times. No products To be determined Shipping 0 Ft. Total Check out Quantity Total Product successfully added to your shopping cart There are 0 items in your cart. There are 0 items in your cart. Since its inception, RUPES’ commitment to produc innovation and quality manufacturing has defined the company as a worldwide benchmark manufacturer of professional electric and pneumatic tools, accessory items and vacuum systems. RUPES HISTORY Designing the future, for over 65 years Only those with a great legacy can drive the future. Our history is composed of achievements, challenges, ideas, and international successes. In 1951 the RUPES 123 Stork is launched and instantly becomes an international hit that sparked the continued evolution of existing machine tools. RU CK31 New product Limited time offer: 412 314 Ft? tax incl. 434 015 Ft? tax incl. -5% This product is no longer in stock Warning: Last items in stock. Contact us ELECTRIC TOOLS BigFoot Nano iBrid Bigfoot Polishers Sanders Grinders Polishers Others Electric PNEUMATIC TOOLS Polishers Sanders Grinders DUST EXTRACTION SYSTEM Centralized Units Mobile Units Swing arms Terminals CONSUMABLES Foam Polishing Pads Polishing Compounds Backing Pads Car Care Products Others OTHERS SPARE PARTS Search No products To be determined Shipping 0 Ft. Total Check out Welcome Login Ft.Continue shopping Compare. Please enable Javascript to implement all features of our website or call 800-522-2025 to place an order. You'll have full access to your order history and a personalized shopping experience. The CK31 capsule is integrated in a rugged metal housing and fits any mounting module of the DAM Series. The package includes a special two-part windscreen, which efficiently reduces wind and pop noise. By continuing, you consent to our use of cookies in accordance with our cookie policy. Learn more: Privacy Policy.

Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation by Intermec Technologies Corporation. All rights reserved. Throughout this manual, trademarked names may be used. Rather than put a trademark ( or ) symbol in every occurrence of a trademarked name, we state that we are using the names only in an editorial fashion, and to the benefit of the trademark owner, with no intention of infringement.Safety Summary Your safety is extremely important. Read and follow all warnings and cautions in this document before handling and operating Intermec equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the safety warnings and cautions. Do Not Repair or Adjust Alone Do not repair or adjust energized equipment alone under any circumstances. Someone capable of providing first aid must always be present for your safety. First Aid Always obtain first aid or medical attention immediately after an injury. Never neglect an injury, no matter how slight it seems. Resuscitation Begin resuscitation immediately if someone is injured and stops breathing. Any delay could result in death. To work on or near high voltage, you should be familiar with approved industrial first aid methods. Energized Equipment Never work on energized equipment unless authorized by a responsible authority. Energized electrical equipment is dangerous. Electrical shock from energized equipment can cause death. If you must perform authorized emergency work on energized equipment, be sure that you comply strictly with approved safety regulations. CK31 Handheld Computer User s Manual vii Global Services and Support A warning alerts you of an operating procedure, practice, condition, or statement that must be strictly observed to avoid death or serious injury to the persons working on the equipment.